CO2 laser parts---Ruida laser motion controller or mother board

Five laser provide full series laser cutting machine used Ruida laser motion controller

Laser mother board is most important laser parts to a laser cutting machine

It controls the X axis and Y axis linear motion, and controlling laser tube output

Even controlling water chiller, exhauster, working table up and down or auto-feeding table working

The laser motion controller can makes the laser cutting speed and laser power in best balance

 

 

The hot selling models such as RDC6442S, RDC6445G, RDC6332, RDV6442G, RDV6445G

 

 

                                

 

 

Ruida---RDC6442S Laser motion controller

 

RDC644XG system is the latest generation of laser engraving / cutting control system developed by Ruida Technology. The control system has better hardware stability and better resistance to high voltage and static electricity. The human-machine operating system based on the 3.5-inch color screen has a more friendly operation interface and more powerful functions. The controller includes more perfe

 

 

 

                                       

Ruida--RDC6445GLaser motion controller

RDC6445G is lastest genaration laser cutting engraving control card. The control system has better hardware stability and better resistance to high voltage and static electricity. The human-machine operating system based on the 5-inch color screen has a more friendly operation interface and more powerful functions. The controller includes more perfect

 

 

 

 

 

Ruida--RDC6332M Laser motion controller

The RDC6332M hybrid cutting control system is a set of hybrid cutting systems specially developed by Ruida Technology based on the mature RDC6332G control system, combining metal sheet and non-metal cutting processing technology. Based on this controller, metal cutting and non-metal cutting can be realized.

 

 

 

                                

Ruida--RDV6442G vision cutting Laser motion controller

The vision cutting control system based on the RDC6442G controller supports the position location of feature recognition and the position assistance of MARK points.

1. Ethernet (10 / 100M) and USB2.0 transmission, the controller automatically queries the communication mode;

2. True color TFT screen, which can display true color processing graphics on the panel, and can accurately know the coordinate position of laser head processing on the panel;

3. The status bar can indicate the border size of the current file, the network connection status, etc.

4. The file graphics saved in the memory can be previewed on the panel, and the speed of swiping the screen is unmatched by domestic manufacturers;

5. Dynamic display of processing trajectory and coordinate points;

6. Dynamically display the processing progress bar of the entire graphic;

7. The processing parameters (such as speed, power, etc.) of each layer can be directly modified on the operation panel, and the modified layer parameters can be automatically saved for subsequent use (this function cannot be implemented by other manufacturers) ;

8. Support power-off and continuous carving, working hours preview (accurate to the millisecond level, the working hours preview value is exactly the same as the actual work time, this function cannot be achieved by other manufacturers);

9, support for feeding, lifting, rotary engraving, left and right push plate and other functions;

 

 

 

 

 

      

Ruida--RDV6445G vision cutting Laser motion controller

Vision cutting control system based on RDC6445G controller, support feature recognition position positioning and MARK point auxiliary position positioning function

1. Support up to 4 servo / stepper motor control;

2. Supports one extended serial port, which can communicate with EPLC-400, wireless handheld devices (BWK201R, BWK301R) and other devices with RS232 standard interface

3. Support 4 OC gate outputs, can directly drive 5V / 24 relay;

4. Support mobile APP;

5. Support dual-head electric mutual shift control and super-format split cutting processing;

6. Support dual-head asynchronous processing;

7.Supports large format vision, mark point visual cutting and projection cutting and other processing methods

 

 

 

 

Ruida--RDC6445G-DFM-RD large format vision cutting Laser motion controller

Based on the RDC6445G hardware platform, it adopts a high-resolution camera, panoramic large-format shooting, and can perform feature positioning and automatic edge-finding cutting functions. Supporting independent application software RDVisionWorks.

 

 

 

 

 

Ruida---Live focus system LFS-PM-T43 for mixed laser cutting