Laser focus lens and mirrors-Five Laser Technology CO., LTD

wechat: 15088276         008615920201400

Five Laser---one-stop laser solutions    Laser parts    Laser focus lens and mirrors
  • CO2 laser parts---Laser delivery system

    On laser cutter, the laser system including laser power supply, laser tube, reflective mirror and focus lens

    After laser tube output, the laser beam was transfered by 3pcs laser reflective mirror and 1pcs focus lens

    The laser mirrors used for reflecting the laser beam, and focus lens used for focusing the laser beam




    The laser focus lens commonly have ZnSe material based and GaAs material based

    ZnSe based focus lens is popular for laser cutting machine, because GaAs material is harmful for enviroment

    Above photo is ZnSe material based focus lens, the ZnSe also have CVD or PVD 2 types




    The popular models on laser cutting machine have diameter like 18mm, 19mm, 20mm and 25mm

    And the focal length of focus lens have 2", 2.5", 3"(or called 50.8mm, 63.5mm, 76.2mm focal length)




    The most important factor for laser focus lens is transmissivity and focusing quality

    Commonly CVD type ZnSe material based focus lens have better transmissivity and focusing quality






    Above photo show different looking for different material focus lens

    Five laser provide many options for laser focus lens

    1. Chinese PVD material based focus lens (deep yellow, low transmissivity)

    2. USA brand CVD II VI focus lens (made in China, light yellow, clear circle on side, high transmissivity)

    3. USA CVD based Five laser brand focus lens (made in China, light yellow, high transmissivity)





                     Material:ZnSe                        Surface Quality:20-10 scratch and dig

    Wavelength:10.6μm                       Centration:<3' arc minutes

    Clear Aperture:>90%                     Focal Length Tolerance:±1%   

    Bevelling:<0.2x45°                         Diameter Tolerance:+0.0/-0.12mm

    Thickness Tolerance:±0.2mm        AR/AR Coating:R<0.5% per surface @10.6μm

    Surface Accuracy:4<λ/2per 1”     Dia@632.8nm






    After focusing, the laser point also much different between PVD and CVD based focus lens

    Five laser brand focus lens have brightness laser point, better focusing quality and stronger cutting force






    Laser reflective mirror have 2 types material based such as molybdenum based mirror and Silicone based mirror

    The Silicone based mirror have higher reflective rate, but the coating film easier burning or drop down

    So the Mo. based laser mirror can be lasting for long time working in dust or smoking conditions





    The popular models for laser mirror used on laser cutting machine

    have different diameter such as 20mm, 25mm, 30mm






    The packing for each laser reflective MO. mirror (Molybdenum mirror)